flow switch | US2-...HH/VM
70,60 EUR
inkl. 19 % USt -> Preis zzgl. Versandkosten
Lieferzeit bzw. Fertigungszeit variiert - bitte erfragen!
Art.Nr.: US2-...HH/VMProduktbeschreibung
formerly known as "Fluvatest"
The paddle flow controller in plastic design has a titanium axis which assures a
low-friction bearing. The paddle follows the flow rate against the force of two magnets
acting as springs. The paddle magnet also activates a reed contact positioned outside the flow chamber.
The paddle is available in two standard lengths. Each paddle can also be shortened at a predetermined breaking point..
- highly reproducible
- low pressure loss
- hermetic separation between electrical and hydraulic component
| switch: | reed switch |
| nominal width: | DN 25 to 80 |
| process connection: |
union nut G 3/4 |
| switching point H2O: | 3 l/min to 62 l/min |
| Qmax: | up to 600 l/min |
| tolerance: | ±15 % |
| pressure resistance: | PN 10 bar |
| temperature of medium: | -20°C to +85°C |
| ambient temperature: | -20°C to +70°C |
| media: | water, oils |
| wiring: | normally open (n.o.) no. 0.372 |
| switching voltage: | max. 240 V AC / 46 V DC |
| switching capacity: | 100 VA / W |
| protection class: | 2 |
| switching current: | max. 1 A |
| ingress protection: | IP 65 |
| cable: | 0.5 m (optional 1 m / 2 m / 3 m) |
| materials in contact with medium: | Noryl (PPO), titanium, barium ferrite, Ms58 (with version VM) |
| materials not in contact with medium: | Noryl, seal EPDM |
| installation location: | Installation location influences the adjustment range! The installation position with a flow from top to bottom is not permitted. |
| dimensions: | Ø 34 x 127 mm (US2-025-...), Ø 34 x 150 mm (US2-050-...) |
| weight: | approx. 50 g (-HH), approx. 105 g (-VM) |
 |
