transmitter for particulate matter | PMsense
622,00 EUR
inkl. 19 % USt -> Preis zzgl. Versandkosten
Lieferzeit bzw. Fertigungszeit variiert - bitte erfragen!
Art.Nr.: PMsenseProduktbeschreibung
general information:
Over the last few decades there have been numerous measures all over the world to limit pollution caused by harmful air emissions. In general, we can state that with the new regulations that have been implemented by most governments we see limitations in harmful emissions from industry, energy and transport.
The exact content of PM can vary by location: it is a mixture of chemical characteristics. Not in all cases the source of PM is something that can be directly controlled, some have natural sources. Main known sources of PM that can be controlled are: industrial
activities, combustion engines, combustion for energy production, road traffic, dust.
activities, combustion engines, combustion for energy production, road traffic, dust.
- continuous air measurement and alarming
- easy cloud connection
- fast detection of PM1.0, PM2.5 and PM10
- smart and versatile
- cost-effective and reliable
main application areas:
Smart City, environmental monitoring, mobility, particulate matter monitoring
specifications:
particulate matter |
|
measuring principle: |
laser scattering |
measured pollutants: | PM1.0, PM2.5 and PM10 |
measuring range: | 0 to 1,000 μg/m3 (for each pollutant) |
particle size detection range: |
∅ 0.3 to 10 μm |
linearity error: | <5 % |
repeatability: | <3 % |
warm up time: | 15 s |
sensor operating mode: | - discontinuous (default) : 5 mins interval ≈ 5 years lifetime - Continuous : 1 sec interval ≈ 10,000 h lifetime |
temperature drift: | <0.01 μg/m3/°C |
CO2 (optional): | |
measuring principle: |
double wavelength NDIR |
measuring range: |
0 to 5,000 ppm |
accuracy: |
±(50 ppm + 3 % of measured value) at +25°C and 1,013 hPa |
response time: |
<120 s (air speed = 2 m/s) |
long-term stability: |
5 % of measured value / 5 years |
temperature drift: | 1 ppm/°C |
|
|
general specifications | |
output: | RS485 with Modbus-RTU or ASCII proprietary protocol |
power supply: | 7 to 30 V DC |
power consumption: | - discontinuous (default) : 25 mA @ 24 V DC during measure, 4 mA stand-by - continuous : 25 mA @ 24 V DC |
connection: | M12 8-pole round plug connector |
operating conditions: | -20°C to +70°C 500 hPa to 1,500 hPa |
housing material: | polycarbonate |
ingress protection: | IP53 housing with sensor inlet air filter rain-proof and UV resistant |
dimensions: | 120 x 94 x 71 (without M12 connector) |
weight: | 330 g |
For further details p.r.t. data sheet:
instruction manual as .pdf: