pressure measuring transducer | UNICON®-P
702,00 EUR
inkl. 19 % USt -> Preis zzgl. Versandkosten
Lieferzeit bzw. Fertigungszeit variiert - bitte erfragen!
Art.Nr.: UNICON-PProduktbeschreibung
general information:
The pressure measuring transducer UNICON®-P can be used for measuring relative, absolute and differential pressure, especially in filter- and clean room technologies. In combination with orifice plates, pitot tubes, etc. the device is also suitable for the measurement of the flow of dry and non-aggressive gases. The construction type for wet media (resistant to condensate; measuring ranges 30-60) is designed for relative pressure only.
Within the measuring range of the device the pressure range required is programmable. The device offers additional features like a unidirectional (e.g. 0 mbar to 1 mbar) or a bidirectional (e.g. -1 mbar to +1 mbar) pressure range. The analog output is adjusted with the measuring range programmed.
- programming assisted by clear words
- for dry and
non-aggressive gases
(construction type resistant to condensate: also water, alcohol, alkaline cleaning supplies, low acids, and many similar gases) - measuring ranges programmable
- output: 4 to 20 mA, 2 wires; 0 to 10 V DC 3 wires
specifications:
measuring principle:
piezoelectric
measuring rate:
2 / sec.
operating temp.:
0°C to +50°C or -15°C to +65°C (construction type resistant to condensate)
supply voltage:
7,5 to 30 V DC, 2 wires 4 to 20 mA,
16 to 30 V DC, 3 wires 0 to 10 V DC
CE-conformity:
fulfills the standard of EN55022,
IEC 61000-4-3/4
ingress protection:
IP65, terminals IP20 acc. to BGV A3
dimensions: 100 x 100 x 60 mm (W x H x D) weight: 360 g max. connection: screw terminal with pressure plate,
2.5 mm² flexible, 4 mm² wire resp. 4-pole plug M12
| For further details p.r.t. data sheet: |  |
| instruction manual as .pdf: |
 |
 |
