meteo data logger | HD 32MT.1
2.214,00 EUR
inkl. 19 % USt -> Preis zzgl. Versandkosten
Lieferzeit bzw. Fertigungszeit variiert - bitte erfragen!
Art.Nr.: HD32MT.1Produktbeschreibung
general information:
The HD32MT.1 is a data logger for capturing and logging the measured values of a series of sensors connected to its inputs.
The data logger is completely programmable by the user and is therefore very versatile. The supplied HD32MTLogger application software, supplied with the instrument, allows simple and intuitive programming by using graphic interfaces, without the need of learning any programming language, thus minimizing the time needed to make the system operational. The values recorded by the instrument can be transferred to a PC by using the HD32MTLogger software. The data logger can be configured to store the instant value, the minimum value, the maximum value, the average value and the standard deviation of the measurements. For measurements that require the counting of pulses, the total amount of counted pulses can be stored. Different acquisition/recording intervals can be programmed for each input. Each recording includes date and time of the acquisition.
The data logger has a “flash” internal memory arranged in circular mode: when the memory is full the new data overwrite the older ones. The number of storable measurements depends on the number of sensors employed, on the type of data to be stored and on the fact whether the sensors are measure all at the same time or at different instants.
Three data logger versions are available, according to the type of communication with the PC:
- basic version: the communication with the PC for data transfer or programming is done via cable connection.
- version with radio modem: in addition to the direct cable connection to your PC, you can perform the data transfer the programming by VHF radio using an optional external radio modem.
- version with TCP/IP: data transfer and programming can be done by TCP/IP via optional external Ethernet serial server.
All versions can be equipped with an optional external GSM module, by which you can send alarm SMS to mobile phones. Recorded data can be sent by e-mail or to an FTP address.
Sensors, cables, the GSM module and the display must be ordered separately.
The radio modem option should be requested at time of ordering, the radio modem
modules with the antennas must be ordered separately.
specifications:
| operating conditions: | -20°C to +50°C, 0 % to 85 % r.h., non-condensing |
| storage temperature: | -25°C to +65°C |
| power supply: | 12 V DC to 30 V DC |
| power consumption: | 40 mA at 12 V DC |
| interval of data aquisition/ data logging: | programmable from 1 sec. to 60 sec. / programmable from 2 sec. to 24 h |
| storage capacity: | 4 MB internal memory SDmemory card reader, up to 4 GB |
| number of samples that can be stored: | the storage of a record consisting of n values requires (4 x n) bytes of memory plus 8 bytes for date and time |
| dimensions/ weight: | 222 mm x 140 mm x 63 mm / approx. 1 kg |
For further details p.r.t. data sheet:
 |