isolating switching repeater | TS 500-Ex
160,50 EUR
inkl. 19 % USt -> Preis zzgl. Versandkosten
Lieferzeit bzw. Fertigungszeit variiert - bitte erfragen!
Art.Nr.: TS500ExProduktbeschreibung
general information:
Isolating switching repeaters TS500-Ex can be used for monitoring and controlling digital signals out of the hazardous area. The intrinsically safe input is suitable for switching contact, proximity switch according to Namur DIN EN 60947-5-6, or passive electronic outputs of other devices. The output can be delivered as relay SPDT or transistor (voltage free). The devices must be installed out of the Ex-area because only the input is intrinsically safe
| explosion protection | |
| certification: |
DMT 99 ATEX E 079 |
| approval: | ATEX II (1) G [Ex ia] IIC/IIB or (1) D [Ex iaD] |
| auxiliary energy |
|
| auxiliary voltage: | 230 V AC ±10 %, 47..63 Hz 24 V ±15 % |
| power consumption: | <2 W |
| operating temperature: | -10°C to +55°C |
| CE conformity: | ATEX-directive 2014/34/EU |
| standards: | EN 60079-0:2006, EN 60079-11:2007 EN 60079-26:2004, EN 61241-0:2006 EN 61241-11:2006 |
| inputs (intrinsically safe) | Namur (acc. to DIN EN 60947-5-6, Namur) |
| no load voltage: | approx. 8 V |
| max. current: | approx. 8 mA |
| switching points: | inactive ≤1.2 mA, active ≥2.1 mA, hysteresis approx. 0.5 mA |
| break of wire: | ≤0.1 mA |
| short circuit switching contact: | ≥7.5 mA |
| output | |
| relay SPDT: | < 253 V AC < 100 VA < 2 A; < 100 V DC < 50 W < 2 A - max. frequency: 5 Hz - max. delay: 20 ms (2-channel: 50 ms) |
| transistor: | max. 35 V DC, max. 50 mA voltage free (short-circuit-proof) - voltage drop: ≤3.5 V active (at load 50 mA) - max. frequency: 2 kHz |
| housing | |
| design: | standard case, Makrolon 8020 UL94V-1 |
| weight: | approx. 200 g |
| electrical connection: | screw terminals, max. 2.5 mm2 |
| ingress protection: | case IP30, terminals IP20 acc. to BGV A3 |
For further details p.r.t. data sheet:
instruction manual as .pdf:
 |
