flow transducer / switch | OMNI-FIS

OMNI: evaluation electronic with analog output, switching function and display

general information:

The magnetic inductive probe FIS are installed into the pipe by means of the supplied welding socket (DN 25) or the mounting clip made of plastic (DN 50 bis DN 150). The complete measurement probe is removable without creating an aperture to the medium. Therefore in case of a defect only the electronic part must be replaced. When an electrical conductor moves vertical to the magnetic field, the movement induces a voltage U in this conductor. With this measurement principle the electrical conductive medium is the conductor. The magnetic field B is located transversely to the flow direction. The induced voltage U is directly proportional to the local flow speed v.

The OMNI transmitter on the sensor has a graphical, backlit LCD display which is clearly readable, both in the dark and in bright sunlight. The graphics display allows the indication of measured values and parameters in a clearly understandable form. The measured values are displayed with 4 digits, together with their physical unit which may also be modified by the user. The electronics have an analog output (4 mA to 20 mA or 0 V to 10 V) and two switching outputs, which can be used as limit switches for minimum or maximum monitoring or as two-point controllers. The switching outputs are designed as a push-pull drivers, and therefore can be used both as PNP or NPN outputs. The exceeding of limit values is signalled by a red LED which is visible over long distances and by a cleartext message on the display. The housing made of stainless steel has a hardened, scratchproof mineral glass pane. It is operated via a programming ing ring that is fitted with a magnet. Therefore housing cutouts for the purpose of operating elements are not necessary and the tightness of the housing is permanently ensured.

By turning the ring to right or left, you may modify the parameters (e.g. switching point, hysteresis...). To protect from unintended programming, it can be taken off, turned by 180° and replaced afterwards, or it can be removed completely, thus acting as a key.

measurement of flow in conductive fluids (4 mA to 20 mA)
a measurement probe for a wide range of pipe diameters
high quality materials
no moving parts
cahnge of sensor without loss of medium
analog output 4 mA to 20 mA or 0 V to 10 V
two programmable switches
graphical LCD display with background illumination, can be read in sunlight and in the dark
selectable units in the display
programmable parameters via rotatable, removable ring (programming protection)
electronic housing with scratchproof, chemically resistant glass
rotatable electronic housing for best reading position
designed for industrial use
small, compact construction dimensions
simple installation

specifications:

appliance:	flow, measurement, control, indication
medium:	conductive, largely homogeneous liquids, pastes and slurries, also with solid content
measuring ranges:	final value 1 m/s to 8 m/s with steps of 1 m/s
connection:	DN 25 welding socket, stainless steel DN 50 to DN 150 tapping sleeve, PP
basic data:	operating pressure max. 25 bar (welding socket), max. 10 bar (tapping sleeve) temperature of medium -25°C to +150°C
electrical data:	supply voltage 18 V DC to 30 V DC, power consumtion <1 W

For futher details p.r.t. data sheet:

OMNI-FIS mit FIS...:

Durchflussmessumformer / -schalter | OMNI-FIS mit FIS-025VK...

GHM Honsberg: OMNI-FIS mit FIS-025VK..., Durchflussmessumformer
OMNI: Auswerteelektronik mit Analogausgang, Schaltfunktion und Anzeige

Technische Daten:

Anwendung:	Durchfluss, Messen, Überwachen, Anzeigen
Medium:	leitfähige, weitgehend homogene Flüssigkeiten, Pasten und Schlämme, auch mit Feststoffanteilen
Messbereiche:	Endbereiche 1 m/s bis 8 m/s in Schritten von 1 m/s
Anschluss:	DN 25 Schweißstutzen, Edelstahl
Eckdaten:	Betriebsdruck max. 25 bar Medientemperatur -25°C bis +150°C
elektrische Daten:	Versorgungsspannung 18 V DC bis 30 V DC, Leistungsaufnahme <1 W

Die genauen Spezifikationen entnehmen Sie bitte dem folgenden Datenblatt:

4.303,00 EUR

inkl. 19 % USt-> Preis zzgl. Versandkosten

bzw. Fertigungszeit variiert - bitte erfragen!

Durchflussmessumformer / -schalter | OMNI-FIS mit FIS-...BB

GHM Honsberg: FIS-...BB, magnetisch induktive Durchflusssonde
Technische Daten:

Anwendung:	Durchfluss, Messen, Überwachen, Anzeigen
Medium:	leitfähige, weitgehend homogene Flüssigkeiten, Pasten und Schlämme, auch mit Feststoffanteilen
Messbereiche:	Endbereiche 1 m/s bis 8 m/s in Schritten von 1 m/s
Anschluss:	DN 50 bis DN 150 Anbohrschelle, PP
Eckdaten:	Betriebsdruck max. 10 bar Medientemperatur -25°C bis +150°C
elektrische Daten:	Versorgungsspannung 18 V DC bis 30 V DC, Leistungsaufnahme <1 W