atmospheric oxygen sensor | GGO 370/GOO 370/GGA 370
204,00 EUR
incl. 19 % VAT excl. shipping costs
delivery time 1 week
Product.Nr.: GGO370/GOO370/GGA370Product Description
atmospheric oxygen electrode for GMH 369x
universal application, for diving gas, longlife
GGO 370
closed sensor type, tube adapter and T-piece incl.
- suitable for over and under pressure
- for use in gas-tight systems
application:Suitable for measurements in normal atmosphere and in systems without or
with slight under or over pressure. The sensor type GGO 370 has a screw
thread and can be installed gas-tight in almost every system directly or with the help of a tube adapter (incl. in scope of supply).
GOO 370
open sensor type, tube adapter incl.
- suitable for air or gas stream
- quick temperature compensation
application:Due to the special construction of sensor the measuring gas streams optimally around the sensor and escapes into the air through holes in the housing. At
slight flow to the sensor, no pressure buil-up occurs that falsifies the results of measurement. Particularly suitable for measuring of gas of pressure cylinders,
etc. Also measuring of indoor-gas concentrations is possible.
GGA 370
closed sensor type with pressure connection, tube adapter and T-piece incl.
This housing is optimal for the device GMH 3695 with external pressure connection. Especially for systems with over or under pressure or at dynamic pressure due to incident flow.
application:It can be screwed in airtightly (attention: please note permissible operating pressure!). The pressure connector of the device is connected to the pressure connector of the sensor. The device measures and compensates the actual pressure at the sensor.
Note: not suited for „under water“-applications (rebreather, etc.)
specifications:
measuring range:
partial pressure of oxygen: 0 hPa to 1,100 hPa O2
concentration of oxygen: 0.0 % to 100.0 % O2specific features: long service life, for protective gases with a high O2 concentration
and oxygen content <35 vol.% O2sensor element:
GOEL 370 - partial pressure sensor for oxygen, mounted in housing, replaceable
(temperature sensor integrated in housing)response time T90:
<10 s
accuracy (at 25°C, 1,013 hPa):
<2 % O2: +0.2 % O2
<25 % O2: +0.5 % O2
>25 % O2: +0.5 % O2operating conditions:
0°C to +45°C
0 % to 95 % r.h. (non-condensing)ambient pressure:
0.6 bar to 1.75 bar abs.
over/under pressure:
max. 0.25 bar (pressure difference of sensor membrane to ambiance - sensor screwed in)
storage temperature:
-15°C to +60°C
operating life:
on air: >4 years (warranty for sensor element: 12 months)
device connection:
approx. 1.2 m long cable with mini-DIN plug
longer cable 4 m or 10 m upon requestdimensions of housing:
GGO: approx. Ø 36 mm x 95 mm (150 mm incl. anti-buckling protection),
GOO: approx. Ø 40 mm x 105 mm (160 mm incl. anti-buckling protection),
GGA: approx. Ø 36 mm x 95 mm (150 mm incl. anti-buckling protection)
housing with M16x1 screw thread
(sensor can be coupled into the line tubes by means of a tube adapter)weight:
approx. 135 g (GGO) or approx. 145 kg (GOO/GGA)
catalogue page as .pdf:
instruction manual as .pdf:
Recommended products
air oxygen measuring device | GMH 3692301,00 EUR |
|
spare sensor element | GOEL 370128,40 EUR |
|
spare tube adapter | ESA 3696,05 EUR |
|
T-piece | ZOT 3697,35 EUR |
|
air oxygen measuring transducer | OXY 3690MP610,00 EUR |
|
flow rate adapter | GZ-1139,20 EUR |
|
atmospheric oxygen sensor | GGO 381/GOO 381/GGA 381248,00 EUR |
|
atmospheric oxygen sensor | GGO 570/GOO 570/GGA 570225,00 EUR |
|
atmospheric oxygen sensor | GGO 581/GOO 581/GGA 581269,00 EUR |
|
air oxygen measuring device | GMH 3695546,00 EUR |