universal displaying and regulating device | GIR 2002
267,00 EUR
inkl. 19 % USt -> Preis zzgl. Versandkosten
Lieferzeit in der Regel ca. 1 Woche
Art.Nr.: GIR2002Produktbeschreibung
universal displaying and regulating device with on/off- or PID-control mode
general information:
Due to its compact construction and easy handling, the universal controller GIR 2002 is the ideal device for simple control systems (on/off switching, relay outputs,...).
The basic version of GIR 2002 PID offers a control output for a 2-point-control with the control modes P, I, PI, PD or PID and a second control output for on/off switching. The device can also be configured as a 3-point step controller or as a controller with continuous output (optionally).
Due to the universal input and the various switching functions, the controller can be adapted optimally to the requirements of the system. The structured menu navigation allows a straightforward handling and a fast adjustment of the parameters.
A LED switching state indicator gives information to the user about the current status of
the switching outputs. An extensive self-monitoring and diagnostic system ensures maximum operational safety and reports systems errors by conclusive error codes. The parameters are automatically saved, so that all data will be maintained even in case of a power blackout.
the switching outputs. An extensive self-monitoring and diagnostic system ensures maximum operational safety and reports systems errors by conclusive error codes. The parameters are automatically saved, so that all data will be maintained even in case of a power blackout.
Most of the Greisinger transmitters, rotational speed sensors and flow rate sensors can be connected directly to the integrated transmitter power supply (24 V DC / 22 mA) of the controller.
If the device is used as a thermocouple or resistance thermometer, the measuring value
can be alternatively displayed in °C or °F. Additionally an offset value for the correction of measuring values can be entered (e.g. reconciliation of the resistivity of the wires). The current and voltage inputs are freely scalable in the range -1,999 to +9,999.
can be alternatively displayed in °C or °F. Additionally an offset value for the correction of measuring values can be entered (e.g. reconciliation of the resistivity of the wires). The current and voltage inputs are freely scalable in the range -1,999 to +9,999.
GIR 2002 has a serial, bus-compatible interface by default. Therefore a comfortable programming of the parameters as well as the recording of measuring values are possible. With the optionally available Windows library EASYBUS.dll up to 240 devices can be integrated into own programs (z.B. LabView).
applications:
- process control
- temperature controller
- pressure monitoring
- indication of rotational speed
- flow counter, etc.
specifications:
measuring input | measuring / display range | accuracy (at nominal temperature) |
thermocouples (4 measurements / s): | ||
FeCu-Ni (type J, IEC 584): |
-70.0°C to +300.0°C or -170°C to +950°C | <0.3 % FS ±1 digit * |
NiCr-Ni (type K, IEC 584): |
-70.0°C to +250.0°C or -270°C to +1,372°C | <0.3 % FS ±1 digit * |
NiCrSi-NiSi (type N, IEC 584): |
-100.0°C to +300.0°C or -270°C to +1,350°C | <0.3 % FS ±1 digit * |
Pt10Rh-Pt (type S, IEC 584): |
-50°C to +1,750°C | <0.5 % FS ±1 digit * |
Cu-CuNi (type T, IEC 584): | -70.0°C to +200.0°C or -270°C to +400°C | <0.3 % FS ±1 digit * |
* = point of comparison: ±1 °C | ||
resistance thermometer (4 measurements / s) | ||
Pt 100 (3-wire, DIN EN 60751): | -50.0°C to +200.0°C or -200°C to +850°C | <0.3 % FS ±1 digit |
Pt1000 (2-wire, DIN EN 60751): | -200°C to +850°C | <0.3 % FS ±1 digit |
process signals / standard signals (100 measurements / s) | ||
0 V to 1 V, 0 V to 2 V, 0 V to 10 V: |
-1,999 to +9,999 digit, freely scalable | <0.2 % FS ±1 digit |
0 mA to 20 mA, 4 mA to 20 mA: | -1,999 to +9,999 digit, freely scalable | <0.2 % FS ±1 digit |
0 mV to 50 mV: | -1,999 to +9,999 digit, freely scalable | <0.3 % FS ±1 digit |
frequency | ||
TTL signal: | 0.000 Hz to 10 kHz, freely scalable | <0.1 % FS ±1 digit |
switching contact NPN: | 0.000 Hz bis 3 kHz, freely scalable | <0.1 % FS ±1 digit |
switching contact PNP: | 0.000 Hz bis 1 kHz, freely scalable | <0.1 % FS ±1 digit |
rotational speed: | 0.000 U/min to 9,999 U/min | selectable prescaler: 1 to 1,000, pulse frequency: max. 600,000 Imp./min at TTL |
flow: | 0 l/s to 9,999 l/s, 0 l/min to 9,999 l/min or 0 l/h to 9,999 l/h | |
counter up/down | ||
TTL signal, switching contact (NPN, PNP): |
0 to 9,999 or 0 to 999,000 (with prescaler), selectable prescaler: 1 to 1,000, pulse frequency: max. 10,000 Imp./s at TTL | <0.1 % FS ±1 digit |
serial interface: | displaying and controlling of values coming via the serial interface | |
switching functions: | 5 or 6, selectable (e.g. 2-point regulator, 3-point regulator, ...) | |
switching point, hysteresis: | freely selectable | |
response time: | ≤25 ms at standard signal; ≤0.5 s at temperature and frequency | |
display: | approx. 13 mm high, 4-digit red LED display | |
interface: | serial interface, galv. isolated, EASYBus compatible | |
transmitter supply: | 24 V DC ±2 %, 22 mA at 230 V AC voltage supply 18 V DC ±2 %, 22 mA at 12 V DC or 24 V DC voltage supply | |
miscellaneous: | permanent self-monitoring, digital filter function, measuring range boundary (limit) | |
power consumption: | approx. 6 VA | |
operating conditions: | -20°C to +50°C, 0 % to 80 % r.h. (non-condensing) | |
panel mounting: | with fixing clamps | |
electrical connection: | via screw-type/plug-in terminals wire cross-section from 0.14 mm2 to 1.5 mm2 | |
ingress protection: | front side IP54, IP65 upon request | |
housing: | standard rack type housing | |
dimensions: | 96 x 48 mm (W x H) (front frame) | |
mounting depth: | approx. 115 mm (with fixing clamps) | |
panel cut-out: | 90.5+0.5 x 43.0+0.5 mm (W x H) |
outputs: p.r.t. data sheet
Please note: Not all options are available for both device types and not all options
can be combined with each other. Please see therefore the matrix on the data sheet.
catalogue page as .pdf: |
Empfohlenes Zubehör | Weitere Artikel
Software für Messdatenerfassung | EBS 20M / 60M121,00 EUR |
|
Zusatzdichtung für Gehäuseeinbau IP65 | GGD 48965,70 EUR |
|
Einheitenaufkleber | EAK 361,55 EUR |