portable measuring device for conductivity and temperature | HD 2106
conductivity, resistivity, TDS, salinity, temperature
The models HD2106.1 and HD2106.2 are portable instruments with a large LCD display. They measure conductivity, liquid resistivity, total dissolved solids (TDS) and salinity using combined 4-ring and 2-ring conductivity / temperature probes. Temperature only is measured by Pt100 or Pt1000 immersion, penetration, contact or air probes. The calibration of the conductivity probe can be performed automatically in one or more of the 147 μS/cm, 1,413 μS/cm, 12,880 μS/cm or 111,800 μS/cm solutions. The temperature probes are equipped with an automatic recognition module and factory calibration data are stored inside. The HD2106.2 is a datalogger. It stores up to 36,000 conductivity and temperature samples which can be transferred to a PC from the instrument connected via the RS232C or USB 2.0 serial ports. The storing interval, printing, and baud rate can be configured via the menu. Both models are fitted with an RS232C serial port and can transfer the acquired measurements to a PC or to a portable printer in real time. The Max, Min and Avg function calculates the maximum, minimum or average values. Other functions include: the relative measurement REL, the Auto-HOLD function and the automatic turning off which can also be excluded.
The instruments have IP66 protection degree.
Probes, calibration solutions and cables are NOT included in the scope of supply. Please order separately!
operating conditions: | -5°C to +50°C, 0 % to 90 % r.h., non-condensing |
storage temperature: | -25°C to +65°C |
ingress protection: | IP 66 |
power supply: |
four 1.5 V type AA batteries, autonomy: 200 h with 1,800 mAh alkaline batteries optional: external mains adapter 12 V / 1.000 mA (SWD-10) |
power consumption with instrument shut off: | 20 µA |
security of stored data: | unlimited, independent of battery charge conditions |
serial interface RS232C: | type: RS232C electrically isolated baud rate: can be set from 1,200 to 38,400 bauds data bit: 8 parity: none stop bit: 1 flow control: Xon/Xoff length of serial cable: max. 15 m print interval: immediate or selectable between 1, 5, 10, 15, 30 s, 1, 2, 5, 10, 15, 20, 30 min and 1 h |
USB interface (HD 2106.2): | 1.1 - 2.0 electrically isolated |
storage of data (HD 2106.2): | type: 2,000 pages containing 18 samples each storage capacity: 36,000 pairs of measurement [χ-°C], [Ω-°C], [TDS-°C] or [Sal-°C] storage interval: 1, 5, 10, 15, 30 s, 1, 2, 5, 10, 15, 20, 30 min and 1 h |
connections: | conductivity input: 8-pol. DIN45326 plug input module for the temperature probes: 8-pol. DIN45326 plug serial interface and USB: 8-pole MiniUSB type B mains adapter: 2-pole connector (positive at centre) |
For further details p.r.t. data sheet:
instruction manual as .pdf:
|
Handmessgerät für Leitfähigkeit und Temperatur | HD 2106.2
525,00 EUR inkl. 19 % USt-> Preis zzgl. Versandkosten bzw. Fertigungszeit variiert - bitte erfragen! |
Handmessgerät für Leitfähigkeit und Temperatur | HD 2106.1
346,00 EUR inkl. 19 % USt-> Preis zzgl. Versandkosten bzw. Fertigungszeit variiert - bitte erfragen! |