pH measuring transducer | GPHU 014 MP
355,00 EUR
inkl. 19 % USt -> Preis zzgl. Versandkosten
Lieferzeit in der Regel ca. 1 Woche
Art.Nr.: GPHU014MPProduktbeschreibung
general information:
- pH measuring transducer with on-site display, without electrode, with BNC or Cinch connection
- automatical or manual temperature compensation
- external Pt1000 temperature probe connectable
- with galvanical isolation
| measuring range: | 0.00 pH to 14.00 pH |
| accuracy: | 0.02 pH ±1 digit (at nominal temperature = +25°C) |
| output signal: | 4 mA to 20 mA (2-wire), standard 0 V to 10 V (3-wire), for an additional charge |
| galvanical isolation: | input galvanically isolated |
| auxiliary energy: | 12 V DC to 30 V DC (for option 0 V to 10 V: 18 V DC to 30 V DC) |
| permissible burden (at 4 to 20 mA): | RA [Ω] ≤ (Uv [V] - 12 V) / 0.02 A |
| permissible load (at 0 to 10 V): | RL >3,000 Ω |
| electrode: | any standard pH electrode is suitable (not in scope of supply) |
| input resistance: | 1012 Ohm |
| electrode connection: | BNC socket or Cinch socket |
| temperature compensation: | -30°C to +150°C, manual via keys or automatical via external Pt1000 probe, banana plug |
| adjustment: | via 3 keys and integrated LCD, 2-point-calibration |
| temperature probe socket: | 2x banana socket Ø 4 mm, for Pt1000 probe |
| display: | approx. 10 mm high, 4-digit LCD display |
| working temperature: | 0°C to +50°C (electronics) |
| storage temperature: | -20°C to +70°C |
| electrical connection: | elbow-type plug acc. to EN 175301-803/A (IP65) |
| housing: | ABS (IP65) except electrode and temperature connection socket (complete IP65 upon request) |
| dimensions: | 82 x 80 x 55 mm (W x H x D) |
| mounting: | with fixing holes for wall mounting (accessible after removal of cover); mounting distance 70 x 50 mm (W x H), fixing screws shaft-Ø 4 mm max. |
| catalogue page as .pdf: |
 |
| instruction manual as .pdf: |
 |
 |
Empfohlenes Zubehör | Weitere Artikel
 |
Arbeits- und Kalibrierset für pH-Messgeräte | GAK 140060,70 EUR |
 |
Standard-pH-Elektrode | GE 100118,00 EUR |
 |
pH-Elektrode (inkl. Pt1000-Sensor) | GE 117 BNC226,00 EUR |
 |
Aufsteck-Gewindeadapter | PG 13.56,90 EUR |
 |
pH-Elektrode für Prozess- und Biochemie | GE 173259,00 EUR |
 |
wasserdichter Pt1000-Luft-/Rohranlegefühler mit Banananstecker | GTF 2000-B-WD64,10 EUR |
 |
Durchflussgefäß | DFG70286,00 EUR |
