pH head transmitter | pH40
193,00 EUR
inkl. 19 % USt -> Preis zzgl. Versandkosten
Lieferzeit bzw. Fertigungszeit variiert - bitte erfragen!
Art.Nr.: pH40Produktbeschreibung
general information:
The head transmitter pH40 provides a cost-effective opportunity for pH measurements. It has been designed for direct mounting onto the pH sensor. It gets fixed with the integrated union nut. The electrical connection occurs via the 8-pole round connector. Depending on the construction type, the signal of the pH sensor is output with a low output impedance or is available as electrically isolated 4 mA to 20 mA signal.
- measuring range -1 to +15 pH
- 2-wire transmitter 4 mA to 20 mA
- unobstructed transmission of measured values up to 100 m
specifications:
auxiliary energy | ||
auxiliary voltage: | 5 V DC to 30 V DC type 0 10 V DC to 30 V DC type 2 | |
operating temperature: | -10°C to +60°C | |
input | ||
pH/ORP measuring range: |
-1 pH to +15 pH / ± 1,500 mV | |
input resistance: | >1012 Ω | |
output | ||
type 0: | 1:1 transmission of the pH-signal with low output impedance, unobstructed transmission of measured values up to 100 m | |
type 2: | 4 mA to 20 mA, 2-wire technology in the range -1 pH to +15 pH referred to 25°C, zero-point pH 7.0, slope 59.2 mV/pH, not compensated | |
basic accuracy: | type 0 = 0.01 % type 2 = 0.2 % | |
housing | ||
material: | PVC-U | |
weight: | approx. 100 g | |
process connection: | S7 | |
electrical connection: | 8-pole round connector | |
ingress protection: | IP65 |
For further information p.r.t. data sheet:
Empfohlenes Zubehör | Weitere Artikel
8-polige Anschlussbuchse | ACI113-...73,90 EUR |
|
Verbindungskabel | SKM8E75,90 EUR |