pH and ORP panelmeter | pH9648
701,00 EUR
inkl. 19 % USt -> Preis zzgl. Versandkosten
Lieferzeit bzw. Fertigungszeit variiert - bitte erfragen!
Art.Nr.: PH9648Produktbeschreibung
general information:
The pH and ORP panelmeter pH9648 is suitable for pH and ORP measurements in food technology, in chemistry, in the pharmaceutical sector and in sewage water technology. The measuring device operates with all common pH and ORP electrodes. It is recommended to connect the impedance converter pH40 for longer cable lengths >5 m.
- LED display 14.2 mm red
- measuring range programmable in the range -1 pH to +15 pH / ±1,500 mV
- temperature compensated via P100/Pt1000 sensor
- analog output 0/4 mA to 20 mA or 0/2 V to 10 V for pH/ORP
- max. 4 alarm outputs relay or transistor
| auxiliary energy | |
| auxiliary voltage: | 230 V AC ±10 %; 115 V AC ±10 %; 24 V AC ±10 % or 24 V DC ±15 % |
| power consumption: | max. 3.5 VA, with analog output 5 VA |
| operating temperature: | -10°C to +55°C |
| CE conformity: | EN 61326-1:2013, EN 60664-1:2007 |
| input | |
| pH/ORP | |
| measuring range: | -1.00 pH to +15.00 pH or -1,500 mV to +1,500 mV |
| Ri: | >1012 Ω |
| input current: | <10-12 A |
| basic accuracy: | 0.2 % of measured value, ±2 digit |
| calibration limits pH: | electrode zero point 4.00 pH to 10.00 pH slope 40.0 mV/pH to 70.0 mV/pH |
| ORP offset: | ±200 mV |
| types of calibration: | - 1- or 2-point calibration buffer selection: - Schott - WTW - Ingold (Mettler Toledo) - buffer acc. to DIN 19266 - or manual input of an arbitrary buffer - data entering of zero point and slope - ORP offset |
| temperature | |
| temperature probe: | Pt100 or Pt1000, (2- or 3-wire connection) |
| unit: | programmable °C, °F |
| measuring range: | -40.0°C to +160.0°C (-40.0°F to +320.0°F) |
| basic accuracy: | ±0.1 %, ±1 digit |
| transmitter supply: | 24 V DC, Ri approx. 150 Ω, max. 50 mA (25 mA with 4 relay outputs) |
| display | |
| display: | LED red, 14.2 mm |
| additional display: | LED 2-digit red, 7 mm (indication of parameter and switching state) |
| output | |
| relay SPDT: | <250 V AC <250 VA <2 A, <300 V DC <50 W <2 A |
| transistor: | <35 V AC/DC, max.100 mA, with electronical current limit |
| analog output: | active: 0/4 mA to 20 mA burden ≤500 Ω; 0/2 V to 10 V burden >500 Ω, galv. isolated output switches automatically (burden dependent) passive: 4 mA to 20 mA, ext. burden = RA[Ω]≤ (Ub - 5 V) ÷ 0.02 A; auxiliary voltage 5 V DC to 30 V DC |
| accuracy: | 0.1 % |
| housing | |
| housing: | panel mounting DIN 96 x 48, material PA6-GF; UL94V-0 |
| dimensions: | front 96 x 48 mm, mounting depth 100 mm |
| weight: | max. 390 g |
| connection: | clamp terminals, 2.5 mm2 single wire, 1.5 mm2 fine-wire AWG14 |
| ingress protection: | front IP65, terminals IP20, BGV A3 |
connection diagram:
instruction manual as .pdf:
 |
