pH- and ORP converter | UNICON®-pH
1.101,00 EUR
inkl. 19 % USt -> Preis zzgl. Versandkosten
Lieferzeit bzw. Fertigungszeit variiert - bitte erfragen!
Art.Nr.: UNICON-pHProduktbeschreibung
general information:
The pH and ORP converter UNICON-pH is suitable for pH and
ORP measurement in food technology, chemistry within pharma-
ceutical and sewage-water technology. The converter works with
all common pH- and ORP electrodes.
- field or head mounting
- measuring range programmable -1..+15 pH / ±1,500 mV
- temperature compensation via P100/Pt1000 sensor
- output 4 to 20 mA for pH and temperature
- 2 alarm outputs, transistor
auxiliary energy | |
auxiliary voltage: | 14 to 30 V DC, 2-wire |
operating temperature: | 0°C to +55°C |
CE conformity: | EN 61326-1:2013 |
input | |
pH/ORP | |
output signal: | 4 to 20 mA |
burden: | RA[Ω]≤ (UB-14 V) ÷ 0.02 A |
measuring range: | -1.00..+15.00 pH or -1,500..+1,500 mV |
Ri: | >1012 Ω |
input current: | <10-12 A |
accuracy: | 0.2 % vom measuring value, ±2 digit |
electrode zero point: | 7.00 pH |
slope: | 30 to 80 mV/pH |
ORP setup: | ±200 mV |
calibration mode: | - 1- or 2-point-calibration buffer selection possible: - Schott - WTW - Ingold (Mettler Toledo) - buffer acc. to DIN 19266 - or manual buffer input - data entering for zero point and slope - ORP setup |
temperature | |
output signal: | 4 to 20 mA |
burden: | RA[Ω]≤ (UB-14 V) ÷ 0.02 A |
temperature sensor: | Pt100 or Pt1000 (2-wire) |
unit: | programmable °C, °F |
measuring range: | -40.0°C to +160.0°C (-40.0°F to +320.0°F) |
accuracy: | ±0.1 %, ±1 digit |
glass impedance: | 0 to 1 GΩ (temperature compensated) |
detection range: | 0.001 to 2 GΩ (non compensated) |
accuracy: | ±20 % |
reference impedance: | 0 to 100 kΩ (non compensated) |
monitoring of the calibration interval: | 1 to 1,000 days |
display | LCD dot matrix, 3.8 mm characters 2 lines 16 characters each |
alarm outputs | |
transistor: | 14 to 30 V DC, max. 60 mA, short-circuit-proof |
voltage drop: | <2 V |
range switch | |
Ri: | >10 kΩ |
MB1 active: | U = 0 to 3 V DC |
MB2 active: | U = 12 to 30 V DC |
housing | |
type of housing: | head-field case |
material: | housing polyamide fiber glass PA6-GF/GK 15/15, front foil polyester |
dimensions: | 100 x 100 x 60 mm (W x H x D) |
weight: | max. 360 g |
connection: | screw terminals pressure plate, 2.5 mm2 flexible, 4 mm2 single wire connection cable |
ingress protection: | IP65, terminals IP20 acc. to BGV A3 |
instruction manual as .pdf:
Empfohlenes Zubehör | Weitere Artikel
Anschlussleitungen zur pH- und Redox-Messung | S784,50 EUR |