digital fine manometer for over / under and differential pressure | GMH 3161-07H

475,00 EUR

 inkl. 19 % USt  -> Preis zzgl. Versandkosten

Lieferzeit in der Regel ca. 1 Woche

Art.Nr.: GMH3161-07H

options GR : Ex-qualification: EX II 2 G Ex ib IIC T4 Gb (+ 280,00 EUR) :

Bitte beachten Sie stets die Bestellhinweise auf den einzelnen Datenblättern!

Produktbeschreibung

device -1.00 mbar bis +70.00 mbar (±70.00 mbar, measuring range possible by changing the pressure connection ports)

general information:

• integrated pressure sensor
  
• stable metal connection pins
• tare function / zero point offset
• model with EX protection available

specifications:

measuring range:	-1.00 mbar to +70.00 mbar
overload:	max. 1,000 mbar
resolution:	0.01 mbar
additional pressure units:	bar, Pa, kPa, PSI, mmHg, mH2O
accuracy (typ. values):	hysteresis and linearity: ±0.1 % FS temperature influence from 0 to 50°C: ±0.4 % FS option higher accuracy available: already integrated
pressure connections:	2
display:	2x 4½-digit LCD
sensor:	Piezoresistive differential pressure sensor internally built into the instrument. Suitable for air and non-aggressive gases. (Note: not suited for water!)
pressure connection:	2 universal pressure ports for 6 x 1 mm (4 mm internal diameter of tube) or 8 x 1 mm (6 mm internal diameter of tube) plastic tubes
output:	interface
serial interface:	yes
analog output:	---
power supply:	9 V battery, mains adapter
sensor adjustment:	digital offset and scale input
peak value memory:	---
measuring cycle:	"slow": 4 measurements / s "fast" (with filter): --- „peak-detect“ (peak value memory): ---
averaging function:	---
battery life:	approx. 500 h
working conditions:	-25°C to +50°C, 0 % to +95 % r.h. (non-condensing) construction type EX: -10°C to +50°C, 0 % to 95 % r.h. (non-condensing)
housing:	142 x 71 x 26 mm (H x W x D) (without pressure connection pin - pin approx. 16 mm protruding at front side of device), impact-resistant ABS, membrane keypad, transparent panel, integrated pop-up clip
weight:	approx. 165 g construction type EX: approx. 205 g (incl. leather case)

note to EX-design types - technical changes compared to standard instruments (valid for all GMH31xx-EX):

EX qualification: II 2 G Ex ib IIC T4 Gb
ref. document: EPS 09 ATEX 1 227 X
standards:
the device meets the standards for electric resources in explosion endangered areas according to EN 60079-0 : 2012, EN 60079-11 : 2012
sensor:
(GMH 3111-EX, GMH 3151-EX, GMH 3156-EX) All GMSD / MSD sensors with option „EX-type“ can be used.
interface:
suitable interface adapter are USB 3100 N, GRS 3100 and GRS 3105
Note: The operation of the interface and the analog output is not allowed within the EX area!
working temperature: -10°C to +50°C
power supply: 9 V battery, mains adapter
Note: The operation of the mains adapter is not allowed within the EX area! Only  adapters of the type GNG10/3000 can be used.
alarm function:
(GMH 3151-EX, GMH 3156-EX, GMH 3181-EX) The device is without a horn, in the alarm settings only the parameter „no.so“ und „off“ are adjustable.
scope of supply:
device is delivered with leather case




catalogue pages as .pdf:





instruction manual as .pdf:

 

 

Empfohlenes Zubehör | Weitere Artikel

	Koffer | GKK 3000 25,70 EUR
	Steckernetzgerät | GNG 10/3000 65,10 EUR
	Schnittstellen-Konverter | GRS 3100 84,60 EUR
	USB Schnittstellen-Konverter | USB 3100N 84,60 EUR
	ISO-Kalibrierschein Druck | WPD 5 140,10 EUR
	ISO-Kalibrierschein Druck | WPD 10 229,00 EUR
	Doppeltülle | GDZ-8 2,90 EUR
	Schlauchschelle | GDZ-18 1,70 EUR
	T-Stück | GDZ-21 2,90 EUR

Warenkorb

Herzlich willkommen

Top Artikel