device configurator | ECI-3

697,00 EUR

inkl. 19 % USt -> Preis zzgl. Versandkosten

Lieferzeit bzw. Fertigungszeit variiert - bitte erfragen!

Art.Nr.: ECI-3

Produktbeschreibung

GHM Honsberg: ECI-3, Gerätekonfigurator
general information:

The ECI-3 configuration interface enables the connection of GHM HONSBERG sensors to the USB port of a computer. All sensors of the OMNI, FLEX, and LABO families, as well as other sensors which contain a microcontroller are supported. Both 2-wire and 3-wire sensors are supported. In combination with the 'HI-Tools' Windows software, this device enables:

the modification of all the sensor configuration settings
the reading of measured values
the adjustment of inputs and outputs
firmware updates

specifications:

auxiliary voltage:	supply of the interface via USB 3-wire sensors also require a supply according to the sensor specifications in the range of 10 V to 30 V (please refer to data sheet of sensor!)
connections:	sensor: device socket M12x1, 5-pole supply: device connector M12x1, 5-pole USB: USB-socket type B
operating temperature:	0°C to +50°C
storage temperature:	-20°C to +80°C
dimensions:	109 mm (W) x 67.5 mm (D) x 34 mm (H)
housing material:	aluminium
ingress protection:	IP 40
weight:	0.16 kg (interface without accessories) 1.02 kg (case, incl. contents)
conformity:	CE
scope of supply:	1. configuration interface ECI-3 2. USB cable 1.8 m 3. M12x1 extension 500 mm 4. valve connector adapter 5. adapter K04-05 6. USB stick with driver software 7. transport case A mains connector is not included in the scope of supply.