data logger for rain gauge | HD 2013-DB

412,00 EUR

inkl. 19 % USt -> Preis zzgl. Versandkosten

Lieferzeit bzw. Fertigungszeit variiert - bitte erfragen!

Art.Nr.: HD2013-DB

Produktbeschreibung

general information:

HD2013-DB is a data logger that has been developed specifically to capture and store rainfall trends. It works with a long-life lithium battery that provides, together with the large memory, a remarkable recording capacity without user intervention. For user convenience, the supplied lithium battery, when exhausted, can also be replaced by three alkaline batteries (not supplied with instrument). The backlit display shows in real time the rain quantity during various time intervals.

The instrument is perfectly waterproof due to the use of reed relays, instead of the common push-buttons. The reed relays are operated by a magnet, attached to the end of an aluminium handle tied to the case. When not in use, the magnet is placed back into its holder.

The software HD32MTLogger, supplied with the instrument, allows the setting of the parameters of the instrument, the real time indication of the captured values, the download to a PC and the processing of the stored data. The connection to the PC is made via the M12 8-pole RS232C serial connector placed at the bottom of the instrument.

HD2013-DB can be connected to the most popular types of rain gauges with normally closed (NC) or normally open (NO) output contact. The automatic display power-off feature allows to prolong the battery life. A front LED enables you to check the operating status of the instrument when the display is shut off. The LED changes colour when the rain gauge contact switches, thus allowing to verify that the rain gauge tipping bucket returns correctly into the stable position after emptying.

specifications:

power supply:	internal non-rechargeable 3.6 V lithium-thionyl chloride battery, size C, capacity 8,400 mAh, Molex 5264 2-pole connector three 1.5 V alkaline batteries (not supplied with the instrument) can be used to replace the lithium battery when exhausted
recorded event:	NC or NO contact
resolution:	configurable from 0.050 to 1.599 mm/sample
storage capacity:	32,255 samples (equal to 6,451 mm rainfall with 0.2 mm/sample resolution)
PC interface:	isolated serial port RS232C – 115,200 baud
display:	2-row backlit LCD display
indication on display:	rain quantity in mm from the counter reset rain quantity in mm within the last hour and the last 4, 24, 48, 72 and 96 hours
LED indicator:	flashes red if the rain gauge contact is open, flashes green if the rain gauge contact is closed
battery life:	approx. 5 years of continuous use with the supplied lithium battery and in typical operating mode, in which the backlit display is turned on occasionally (about 10 minutes per day) approx. 18 months of continuous use with 3 alkaline batteries with 2200 mAh capacity
operating temperature:	-30°C to +60°C
ingress protection:	IP 67, incl. connectors