capacitive level gauge | UNICON®-CL
1.247,00 EUR
inkl. 19 % USt -> Preis zzgl. Versandkosten
Lieferzeit bzw. Fertigungszeit variiert - bitte erfragen!
Art.Nr.: UNICON-CLProduktbeschreibung
general information:
- microprocessor controlled measurement with LCD display
- measuring unit programmable
- tara function (level 0)
- no moving parts in the medium
- for conductive liquids, acids or lyes
- not for adherent media
- temperature compensation with Pt100 sensor
- outputs 4 to 20 mA, 2-wire for level and temperature, measuring range programmable
- 2 alarm outputs, transistor voltage free, min or max function
- programmable set points
- simulation mode (manual mode) for level and temperature
- level correction of the indicating range
- 2-point calibration to adapt to geometry of the tank
- horizontal or vertical mounting of the electronics
auxiliary energy |
||
auxiliary voltage: | 14 to 30 V DC, 2-wire |
|
CE conformity: | EN 61326-1:2013 |
|
ambient conditions |
||
ambient temperature: | -10°C to +50°C | |
climatic class: | EN 60068-2-38 | |
ingress protection: | IP65 | |
input | ||
measuring range: | 0 mm to 100 mm, up to max. 3,000 mm | |
repeatability: | ±2 mm | |
standard error: | 0.5 % of measured value | |
refresh time: |
| |
electrical connection: | screw terminal with pressure plate 2.5 mm2 IP20 acc. to BGV A3 | |
galv. isolation: | sensor/supply/outputs | |
outputs | ||
level: | 4 to 20 mA, 2-wire | |
temperature: | 4 to 20 mA, -40°C to +160°C, 2-wire Pt100 sensor class B acc. to DIN60751 | |
alarm: | transistor 14 to 30 V max. 60 mA | |
housing | ||
material: | polyamide PA6-GF/GK 15/15 front foil Polyester | |
protection class: | IP65 | |
sensor | ||
Mounting direction: | only vertical | |
radiated frequency: | 400 kHz | |
conductivity medium: | >50 μS/cm | |
viscosity medium: | <2,000 mm2/s (cSt) | |
process temperature: | 0°C to +60°C / -10°C to +120°C, 140°C <1h CIP-/SIP-capable | |
process pressure: | 0 bar to 16 bar | |
process material: | PTFE with aluminum core, sealing FDA conform stainless steel 1.4404 AISI 316L | |
process connection: | G 3/4 A | |
stud torque: | 10 Nm max. |
For further details p.r.t. data sheet:
instruction manual as .pdf: