biaxial ultrasonic anemometer | HD 51.3D...
2.463,00 EUR
inkl. 19 % USt -> Preis zzgl. Versandkosten
Lieferzeit bzw. Fertigungszeit variiert - bitte erfragen!
Art.Nr.: HD51.3DProduktbeschreibung
general information:
HD51.3D4R and HD51.3D4R-AL are 2 axes ultrasonic static anemometers with integrated heater. The heater prevents the accumulation of snow and ice formation, allowing accurate measurements in all environmental conditions.
HD51.3D4R-AL is equipped with an enhanced heater, for rapid defrosting, and an anodized aluminum alloy housing with anti-corrosion coating that makes it possible to use the instrument even in a particularly aggressive atmosphere (e.g., marine environment).
The anemometer satisfies the requirements of the MIL-STD-810G Method 509.6 standard (salt fog anti-corrosion test). The high immunity to electromagnetic disturbances makes the anemometer suitable for measurements in electrically noisy environments (e.g., industrial environments, wind farms, etc.).
The anemometers measure:
- wind speed up to 80 m/s (HD51.3D4R-AL) or 85 m/s (HD51.3D4R)
- wind direction
- wind gust
- atmospheric pressure (with internal sensor)
The average of wind speed and direction over a period that is configurable up to 10 minutes is calculated.
specifications:
wind speed: | sensor: ultrasound measuring range: 0 to 85 m/s (HD51.3D4R) 0 to 80 m/s (HD51.3D4R-AL) resolution: 0.01 m/s accuracy: ±0.2 m/s or ±2 %, the higher value applies (0 to 60 m/s), ±3 % (> 60 m/s) |
wind direction: | sensor: ultrasound measuring range: 0 to 359.9°. In order to avoid oscillations of the analog output around 0°, the extended range 0 to 539.9° can be set resolution: 0.1° accuracy: ±2° RMSE (wind speed >2 m/s) |
Luftdruck: | sensor: piezoresistive measuring range: 300 to 1,100 hPa resolution: 0.1 hPa accuracy: ±0.5 hPa at 20°C |
instrument power supply (excluding heater): | 12 to 30 V DC |
heater power supply: | 24 V DC ±10 % |
instrument power consumption (excluding heater): | 60 mA at 24 V DC |
heater power consumption: | 15 W at 24 V DC (HD51.3D4R) 80 W at 24 V DC (HD51.3D4R-AL) |
serial outputs: | isolated RS232, RS485 and RS422 |
communication protocols: | NMEA, MODBUS-RTU, ASCII proprietary |
analog outputs: | 2 analog outputs, for wind speed and direction or for cartesian components U-V of velocity. Available outputs: 4 to 20 mA (standard, max. load 500 Ω), 0 to 1 V, 0 to 5 V and 0 to10 V. The outputs are isolated from the power supply. |
measurement interval: | from 250 ms to 1 s |
wind speed average interval: | configurable from 1 s to 10 min |
wind gust calculation interval: | configurable from 1 s to 10 min |
electrical connection: | 19-pole M23 plug |
operating temperature: | -40 to +60°C |
ingress protection: | IP 66 |
anti-corrosion test: | according to MIL-STD-810G Method 509.6 (48 hours of exposure + 48 hours of drying) |
material resistance up to: | 90 m/s (HD51.3D4R) 100 m/s (HD51.3D4R-AL) |
weight: | approx. 640 g (HD51.3D4R) approx. 1.4 kg (HD51.3D4R-AL) |
housing: | ASA with aluminum and AISI 316 metal parts (HD51.3D4R) Anodized aluminum alloy and AISI 316 (HD51.3D4R-AL) |
installation: | on a mast with 40 mm external and 36 mm internal diameter |
For further details p.r.t. data sheet: