complete set | GMH 3161-12-WPD5
Product Description
set GMH 3161-12-WPD5 consisting of:
- vacuum- or barometer for measurement of absolute pressure GMH 3161-12
(0 mbar to 1,300 mbar abs.) - works calibration certificate WPD5 (5 points ascending / descending)
- case GKK 3000
- integrated pressure sensor
- stable metal connection pins
- tare function / zero point offset
- model with EX protection available
| measuring range: | 0 mbar to 1,300 mbar abs. |
| overload: | max. 4 bar abs. |
| resolution: | 1 mbar |
| additional pressure units: | mbar, bar, kPa, MPa, PSI, mmHg, mH2O |
| accuracy (typ. values): | hysteresis and linearity: ±0.2 % FS; (±0.1 % FS at option "higher accuracy") temperature influence from 0 to 50°C: ±0.4 % FS option higher accuracy available: yes |
| pressure connections: | 1 |
| display: | 2x 4½-digit LCD |
| sensor: |
Piezoresistive differential pressure sensor internally built into the instrument. Suitable for air and non-aggressive gases. (Note: not suited for water!) |
| pressure connection: | 2 universal pressure ports for 6 x 1 mm (4 mm internal diameter of tube) or 8 x 1 mm (6 mm internal diameter of tube) plastic tubes |
| output: | interface |
| serial interface: | yes |
| analog output: | --- |
| power supply: | 9 V battery, mains adapter |
| sensor adjustment: | digital offset and scale input |
| peak value memory: | --- |
| measuring cycle: | "slow": 4 measurements / s "fast" (with filter): --- „peak-detect“ (peak value memory): --- |
| averaging function: | --- |
| battery life: | approx. 500 h |
| working conditions: | -25°C to +50°C, 0 % to +95 % r.h. (non-condensing) construction type EX: -10°C to +50°C, 0 % to 95 % r.h. (non-condensing) |
| housing: | 142 x 71 x 26 mm (H x W x D) (without pressure connection pin - pin approx. 16 mm protruding at front side of device), impact-resistant ABS, membrane keypad, transparent panel, integrated pop-up clip |
| weight: | approx. 165 g construction type EX: approx. 205 g (incl. leather case) |
EX qualification: II 2 G Ex ib IIC T4 Gb
ref. document: EPS 09 ATEX 1 227 X
standards:
the device meets the standards for electric resources in explosion endangered areas according to EN 60079-0 : 2012, EN 60079-11 : 2012
sensor:
(GMH 3111-EX, GMH 3151-EX, GMH 3156-EX) All GMSD / MSD sensors with option „EX-type“ can be used.
interface:
suitable interface adapter are USB 3100 N, GRS 3100 and GRS 3105
Note: The operation of the interface and the analog output is not allowed within the EX area!
working temperature: -10°C to +50°C
power supply: 9 V battery, mains adapter
Note: The operation of the mains adapter is not allowed within the EX area! Only adapters of the type GNG10/3000 can be used.
alarm function:
(GMH 3151-EX, GMH 3156-EX, GMH 3181-EX) The device is without a horn, in the alarm settings only the parameter „no.so“ und „off“ are adjustable.
scope of supply:
device is delivered with leather case
catalogue pages as .pdf:
instruction manual as .pdf:
 |
Recommended products
 |
protection bag for devices | ST-R152,30 EUR |
 |
case | GKK 300028,30 EUR |
 |
power supply unit | GNG 10/300071,60 EUR |
 |
serial interface converter | GRS 310093,10 EUR |
 |
USB interface converter | USB 3100N84,60 EUR |
 |
ISO calibration certificate pressure | WPD 5140,10 EUR |
 |
double nozzle | GDZ-82,90 EUR |
 |
tube clip | GDZ-181,70 EUR |
 |
T-piece | GDZ-212,90 EUR |
 |
vacuum- / barometer for measurement of absolute pressure | GMH 3161-12435,00 EUR |
|
protection bag for devices | ST-R1-US55,30 EUR |
