leak water detector with switch-off mechanism, solenoid valve | GEWAS 191 AN
Product Description
permanent protection against water damage
- GEWAS 191 AN: completely ready for use with magnetic valve control + machine switch-off at alarm
general information:
The compact water sensor lies flat on the floor (can be screwed on) and detects finest water films - The device gives loud alarm!
A solenoid valve is also switched off to stop the water source and the machine is switched off to prevent sensitive pumps from running dry.
This combination of features surpasses the safety of simple aquastop systems or similar battery operated control units.
- safe warning in case of water leakage: loud buzzer
- water is reliably blocked by solenoid valve
- version-AN with machine shutdown via integrated socket up to 16 A - prevents dry running!
- easy commissioning and installation due to Schuko type plug and socket
- different valves for pipes and ¾" faucets, suitable for drinking water
- always safe: no battery change due to mains operation
- incl. compact universal water sensor, can even be used on metal surfaces
- for water treatment, filters, washing machines, dishwashers, etc.
- made in Germany
application areas:
- increased protection of washing machines and dishwashers and other gastro equipment with water connections
- water filters such as reverse osmosis systems where simple tubing and connection systems can be prone to leakage
- water treatment plants and pumps in hospitals, industrial plants, heating systems and much more
power supply: | 230 V 50/60 Hz (control unit) |
power consumption: | approx. 3 VA |
control output: | switched integ. socket |
switching current: | max. 16 A (resistive load) |
water sensor: |
Highly sensitive water sensor, ready to plug in, 2 m cable. Triggers alarm at ½ mm water film. Several water sensors can be connected at the same time using the GAZ-1 branch connector. Extension cables 2 m, 5 m and 10 m available. |
alerting: |
at water detection or unintentional unplugging of solenoid valve or water probe |
valve voltage: | safety low voltage 12 V DC |
solenoid valves, suitable for drinking water – depending on version | |
GMV 191: |
glass fiber reinforced polyamide, ¾" screw connection for direct attachment to faucets or to ½" washing machine or dishwasher hose with ¾" wing nut at valve outlet working pressure: max. 6 bar, servo-controlled, opening at pressure difference between inlet and outlet: min. 0.5 bar |
GMV TW-M-H: | brass – assambly like GMV191 working pressure: max. 13 bar, servo-controlled, opening at pressure difference between inlet and outlet: min. 0.15 bar |
GMV TW-M-1/2: | brass – pipe assembly with internal thread ½", suitable for water installation working pressure: max. 13 bar, servo-controlled, opening at pressure difference between inlet and outlet: min. 0.15 bar |
GMV TW-M-3/4: | brass – pipe assembly with internal thread ¾“ working pressure: max. 10 bar, servo-controlled, opening at pressure difference between inlet and outlet: min. 0.15 bar |
GMV TW-M-1: | brass – pipe assembly with internal thread 1“, suitable for water installation working pressure: max. 10 bar, servo-controlled, opening at pressure difference between inlet and outlet: min. 0.15 bar |
ambient conditions: | 0°C to +50°C; 0 to 90 % r.h. (non-condensing) |
housing: | break-proof ABS |
ingress protection: | IP20, application in closed rooms |
dimensions: | control unit 126 x 79 x 54 mm (L x W x H) |
For further details p.r.t. data sheet: |
instruction manual as .pdf: |