temperature measuring transducer | GTMU-IF...

Product Description

Temperature transmitter with digital adjustment

 

GTMU-IF1

standard: probe length FL = 100 mm, D = 6 mm

GTMU-IF2

standard: probe length FL = 100 mm, D= 6 mm G = 1/2" (= 1.27 cm)

GTMU-IF3

standard: probe length FL= 50 mm, HL = 100 mm, D= 6 mm, G = 1/2" (= 1.27 cm)

Specifications:
Measuring range:	GTMU-IF1: -30 to +100°C (standard) GTMU-IF2: -30 to +100°C (standard) GTMU-IF3: -70 to +400°C (standard) The probe length "FL" has to be chosen long enough, that the allowable temperature range of the electronics situated in the tube sleeve is not exceeded. other measuring ranges (max. -200 to +500°C) upon request
Accuracy:	(At nominal temperature = 25°C) Electronic: +0,2% of meas. value +0,2 °C Measuring probes: standard: DIN class B (optionally higher sensor accuracy available)
Measuring probe:	internal Pt1000-sensor
Output signal:	standard: 4 - 20 mA (2-wire), optionaly: 0-1V, 0-10 V (other signals upon request)
Auxiliary energy:	Uv  = 10 ... 30 V DC
Permissible burden:	RA <(UV - 10V)/0,022 A RA in Ohm, UV in V)
Scaling:	The transducer can be scaled freely within the measuring ranges via GTMU-IF programming tool
Operating temperature of electronic:	(in tube sleeve): -25°C to  + 60 °C
Electric connection:	approx. 1m long 4-pin cable (2 x current loop, 2 x interface)
Thread:	Standard: G 1/2" (= 1,27 cm) Optionally: G 1/8" (= 0,3175 cm), G 1/4" (= 0,635 cm), G 3/8" (= 0,9525 cm), G 3/4" (= 1,905 cm), M8x1, M10x1, M14x1.5
Housing:	Stainless steel housing
Dimensions:	depending on sensor construction
Tube:	stainless Tube diameter "D": 3, 4, 5, 6 oder 8 mm (6mm = standard) Tube length "FL": 100 or 50 mm or on customer requirement Collar tube length "HL": 100 mm or on customer requirement Tube sleeve: diameter 15x35 mm (without screwing) The probe length "FL" has to be chosen long enough, that the allowable temperature range of the electronics situared and of the housing not overstop 70°C!

 

catalogue page as .pdf:

instruction manual as .pdf: